HOW TO PREVENT AND DETECT WATER CONTAMINATION IN YOUR OIL TANK

HOW TO PREVENT AND DETECT WATER CONTAMINATION IN YOUR OIL TANK

How could water get into your oil tank?

Extremely wet or hot weather can cause water problems for your oil tank, since rain and condensation can both lead to water contamination in your oil. Some of the most common reasons for water contamination include damage to your tank such as little cracks or not being careful to fasten the cap on properly. This can allow water to get into your tank and add moisture into the air which then causes condensation.

Why is having water in your oil tank a problem?

Water can hurt your oil tank or boiler without you realizing it until it is severely damaged. Knowing your oil tank has been contaminated by water is difficult to recognize, as it sinks to the bottom of the oil. To make sure you don’t experience this unpleasant surprise, we at HeatingOilApp.com are going to share some tips on how to prevent water contamination from occurring in your oil tank.

Tips on how to prevent water contamination in your oil tank:

  1. Get an engineer to check your tank at least once a year.
  2. Check your tank and pipes for evidence of age and use such as cracks, corrosion, oil stains, or any other damage.
  3. Check around your tank for any signs of leaks.
  4. Check your tank walls. If they are bulging, it may indicate that they’ve been weakened, which could mean a new tank is needed.
  5. If you have a bunded tank (a tank with a secondary wall), check to make sure that leaves and/or water are not clogging the wall.
  6. Check your tank’s lid to be sure that it is secure. It should be level and not loose.
  7. Make sure there are no overgrown plants near or over the top of your tank, since they may drip water into the tank after it has rained. Put some water removal sponges at the bottom of the tank to reduce condensation.

How can you find out if you have water in your oil tank?

Frequent testing for water is a great way to reduce the chances of having issues with your oil tank or boiler. The simplest way to find out if your tank contains water is to buy water finding paste. All you have to do is to find a long stick and put the paste on the end of it, then push the stick to the bottom of the oil tank. After a few minutes, pull the stick back up to surface. If the paste has changed color, you have water in your tank.

How can you remove water from your oil tank?

If you find water in your oil tank, it is very important that you remove it. Here are several ways toremove water from your tank:

  1. Oil Tank Water Removal Sponge

    An oil tank water removal sponge will absorb the water in your tank. This sponge will remove the water without absorbing your heating oil.

  2. ​Heating Oil Water Trap

    There is a filter that allows you to easily drain off any water collected from your heating oil.When you notice any trapped water in the filter bowl, simply open a valve to drain this off.

Finally, the best water contamination prevention tip is to simply keep an eye on your tank throughout the year. These tips will reduce the chances of an expensive repair bill coming your way.